The Sea-Hook Galvanized Claw Anchor, 22 lbs. (31 to 35 ft. Boat)

The Sea-Hook® Claw Anchor is roll stabilized to perform well on short scopes and set effectively. Designed to right itself no matter how it lands on the bottom, it remains stable under a wide range of tide and wind conditions. Exceptional holding power in most sea beds. Stows easily on a bow roller. Quick set and reset. Constructed of hot dipped galvanized cast steel in a single piece design for maximum strength and holding power. 318501-318530 are investment cast. 318550-318580 are sand cast. Heat treated type C1035 steel. A competitively priced alternative to the Bruce® anchor.
• Resets quickly with a change in direction of pull
• Breaks out easily when pulled vertically for raising
• 4.4 to 66 lbs. models are investment cast
• 110 and 165 lbs. models are sand cast
• Note: the table below is based on the manufacturer's recommendations, and is meant as a guide only. If you are in doubt about the appropriate choice of anchor for your boat, please call us for advice.