22mm Metric Series Quick Connect End Stop

With Sea Tech's Quick Connect Fittings, you can plumb an entire boat without any tools except a tape measure and tubing cutter in an amazingly short period of time compared to conventional plumbing systems.

• Thermal plastic black fittings and premium polyethylene tubing
• Fittings rated to 250psi at 75°F and 100psi at 140°F; tubing to 160psi at 72°F and 100psi at 180°F
• Exclusive patent pending O-ring guide properly aligns O-ring seal and prevents O-ring damage and dislodging during installation
• Fittings can rotate while under pressure without scoring
• Multiple fittings can be directly connected in series to create mini-manifolds without the need for intermediate tubing
• Components can be disconnected and reused without tools by simply pushing in on the (lockable) collet
• SeaTech female swivel connectors utilize a nut with NPS straight threads and a cone seal; this allows the installer to thread onto NPT, NPS, BSP and most 1/2" male threads without tools

Note: Although these fittings are described by their nominal Copper Tubing Size (CTS) by Sea Tech, Fisheries Supply has chosen to use the more functional Outside Diameter (OD) in describing these fittings. Any appropriate tubing, with the OD specified in the table below can be used with these fittings.

Are Quick Connect fittings reusable?

A plastic quick-connect fitting is a sturdy fitting that is perfect for water applications. It is simple to install and can be removed and used again.

Do I need Teflon tape with Quick Connect fittings?

You should not need teflon tape with tose fittings.