FFE-200 Fitting Epoxy is a custom blended flexible mastic of high quality epoxy resins,activators and engineered fillers. It produces a lightweight, flexible and easily-sanded compound which can be used for both fairing of deck substrates and the final glue-down of deck panels.
FFE-200 weighs only 6 pounds per gallon when cured, and its cell-like structure makes it an excellent sound and thermal insulator.
The viscosity of the FFE-200 is formulated to be high enough to stay in place when used for fairing, but low enough to provide excellent wet-out for bonding.
Cures in temperatures as low as 45° F or 7°C.
Developed to be user-friendly, the simplified 1:1 mix ratio allows a batch of any size to be easily measured and mixed. Once thoroughly mixed, the material can be spread immediately, requiring no induction time.
At 77° F, a layer of FFE-200 applied with a 3/16" toothed trowel will have an open time of approximately 60-70 minutes, the material will set in approximately 4-6 hours, and complete cure will be achieved in approximately 24 hours.
TDS Fitting & Fairing Epoxy is DOT non-corrosive, so it does not require hazardous labeling for shipment.
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm.
www.P65Warnings.ca.gov