The BMV-700 is the base model in the BMV (Battery Monitor Victron) Series – for batteries in the 6.5 - 95 voltage range, and battery capacities from 1 - 9999 Ah.
Even so, the BMV-700 is still a high precision battery monitor, as are all the BMV monitors.
The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.
A battery "fuel gauge", time-to-go indicator, and much more...
The remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account.
Next to the basic display options, such as voltage, current and ampere-hours consumed, the BMV-700 monitor also displays state of charge, time to go, and power consumption in Watts.
Bluetooth Smart
Use Victron's Bluetooth Smart dongle (sold separately) to monitor your batteries on Apple or Android smartphones, tablets, Macbooks and other devices.
Easy to install
All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable.
An RJ 12 cable (10m/33 ft) and a battery cable with fuse (2m/7 ft) are included. No other components are needed.
Also included are a separate front bezel for a square or round display appearance, a securing ring for the rear mounting, and screws for the front mounting.
Easy to program using your smartphone
A quick install menu and a detailed setup menu with scrolling texts assist the user when going through the various settings.
Alternatively, choose the fast and easy solution: download the smartphone app (Bluetooth Smart dongle needed).
Other features...
• Battery voltage, current, power, ampere-hours consumed, and state of charge
• Remaining time at the current rate of discharge
• Programmable visual and audible alarm
• Programmable relay, to turn off non-critical loads or to run a generator when needed
• 500 Amp/50 mV quick-connect shunt and connection kit
• Alternative shunts are available if required: 1000A-50mV, 2000A-50mV, 6000A-50mV
• VE.Direct smart networking communication port
• Stores a wide range of historical events which can be used to evaluate usage patterns and battery health
• Wide input voltage range: 6.5 – 70V
• High current measurement resolution: 10 mA (0.01A)
• Low current consumption: 2.9 Ah per month (4mA) @12V and 2.2 Ah per month (3mA) @ 24V
NOTE – Unlike the BMV-702 and BMV-712 Smart, the BMV-700 the does not have an auxiliary input.
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm.
www.P65Warnings.ca.gov