Combination Back-Mounted High Pressure Supplied Air Kit (Shown)

These positive pressure systems afford a higher level of protection than face masks alone, as the user is not dependent on the integrity of the facepiece seal to prevent exposure.
The wishbone style dual airline breathing tube and regulator assembly enables you to use your 3M™ half- or full-facepiece respirator with supplied air.

You will need to decide on high or low pressure for your air source.
High pressure typically refers to using your shop air compressor with additional filtration and pressure regulation (#2806 Filter Panel - see Related )Products, below).
Low pressure requires the purchase of a dedicated low pressure air pump.

• NIOSH/MSHA approved, and ideal for welding, spray painting, chemical handling, and many other applications
• Choose a half facepiece for fitting under welding shields and other safety gear
• Dual airline assemblies are compatible with all 3M bayonet facepieces

Wishbone Assemblies come with either long wishbone hose legs for running up your back and around to the facepiece, or short wishbone hose legs for hanging from the front of the facepiece.
Both come with clips for securing the hose to your garment.
We list the more popular back-mounted assemblies.

Kits with "Standard" Wishbone Air Hoses -
In most work environments, "standard" front or back mounted, direct-connect hoses are adequate for complete worker respiratory protection.

Kits with "Combination" Wishbone Air Hoses -
In some circumstances, it may be necessary to disconnect from the "house" supplied air hose in order to maneuver around an obstacle, exit the spray booth, etc. — leaving the worker unprotected during that time.
Use of a "combination" air hose allows a connection from the belt-mounted regulator to the facepiece for positive pressure supplied air, and also has a provision on the facepiece bayonet connector to attach an appropriate filter/cartridge for self-contained negative pressure protection (see image).
This keeps the worker protected at all times — even when temporarily disconnected from the supplied air source.
Switch-over between supplied air and filter/cartridge air occurs automatically when the "house" airline is disconnected or reconnected.
Use of a filter/cartridge is mandatory when using a "combination" hose — they won't function properly without them.