Awlcraft SE Metallic Basecoat - Twilight Gray, GA

Awlcraft SE is a revolutionary basecoat, with a boundless palette of special effect colors to enhance any boat. This product is fast-drying with excellent opacity, made for quick application and easy repairs. Complemented by a high gloss clearcoat such as Awlgrip HDT or Awlcraft 2000 Clear, this Awlgrip basecoat/clearcoat system provides the optimum protection. SE basecoats come in three styles - metallic, pearlescent and solids and a clearcoat MUST be applied over this product. Custom colors (including color matching) are available - but the ones listed here are metallic shades of gray.

FAST
With Awlcraft SE you can apply multiple basecoats per day that can be clear coated in less than 30 minutes, making it possible to complete in 24 hours.

REPAIRABLE
State-of-the-art solution for repairability means that any defects can be easily and speedily rectified, while fast drying means no loss of downtime.

EASY
Easy to apply for a consistent and even finish – repeatable results that cannot be as easily achieved using most single stage coatings.

FEATURES:
• Revolutionary basecoat encompassing metallic, pearlescent and solid colors
• Available in standard and custom colors with a variety of finishes
• Any in-yard defects can be easily and speedily repaired – no loss of downtime
• A premium yacht-quality finish from a basecoat/clearcoat system designed for the harsh marine environment
• Fast drying allowing multiple coats per day
• Easy application consistently giving an excellent even finish
REPAIR PRODUCTS
Should you need to repair an Awlcraft SE coating system, from the smallest scratch through to a large scale repair, Awlgrip repair products in conjunction with the Awlcraft SE Repair Manual will take you step-by-step through the preparation, application and finishing of the coating system – greatly aiding in the outcome of a successful repair.
Awlgrip Repair - Basecoat Foundation Coat E3001
Awlgrip Repair - Basecoat Blender T0190
Awlgrip Repair - Topcoat Blender T0195

SPECIFICATION DATA
Part Numbers:
L-code (Base special effects)
Q-code (Awlcraft SE toners)
F3029 (Awlcraft 2000 Clear base)
C0300 (Awlgrip HDT Clear base)
Reducers: T0001, T0003, T0005
Curing agent: G3010 (Awlcat #2)
Mix Ratio by Volume: 1 : 0.5 : 0.15
Awlcraft SE Base : Reducer : Awlcat #2
Wet Film Thickness: 2-4 mils (50-100 microns) per coat
Dry Film Thickness: 1-2 mils (25-50 microns) per coat
Number of coats: 2 or more
Application Method: Conventional air atomized spray or HVLP spray
VOC (unreduced): Base: 691 g/lt or 5.77 lbs / gallon
Converter: 591 g/lt or 4.9 lbs / gallon