SeaTalk 1 to USB Converter

The SeaTalk™ interface, initially created by Autohelm in the early 1990s, was integrated into nearly all Autohelm and Raymarine (and some Raytheon) products until approximately 2012. Consequently, there exists a multitude of boats worldwide equipped with a SeaTalk 1 network. Numerous owners of these boats, due to various circumstances, require the conversion from SeaTalk to either NMEA 0183 or USB.

Raymarine’s own SeaTalk to NMEA converter (E85001) is no longer available. Although some of these instruments/MFDs/autopilots have NMEA0183 interfaces, they do not always convert all of the data and require additional NMEA to USB adaptors.

Digital Yacht’s SeaTalk to USB Converter is a small but powerful interface that provides bi-directional conversion between a SeaTalk network and a computer’s USB interface. The ST-NMEA converter takes its power from the SeaTalk network. It features a full, multi-transistor SeaTalk 1 interface and a high speed USB 2.0 interface. Therefore, key navigational data between the SeaTalk network and applications running on the computer can be shared reliably.

The ST-NMEA converter can also be configured to work in a special “Raw Data” mode ($STALK) which is gaining support in some Open Source projects. Developers and advanced users that want to access the raw SeaTalk data can take advantage of this.

This Seatalk to NMEA converter is ideal for connection to any USB equipped computer (Windows/Mac/LINUX compatible). An ISO Version of the ST-NMEA Converter is also available for direct connection to NMEA0183 systems.

The SeaTalk1 to NMEA 0183 (ISO) Converter (ZDIGSTN) is ideal for connection to one of Digital Yacht’s wireless NMEA servers, allowing SeaTalk owners to go wireless. Similarly the Seatalk to NMEA converter (ZDIGSTNUSB) is ideal for connection to any USB equipped computer (Windows/Mac/LINUX compatible).

• Small but powerful bi-directional seatalk to nmea converter
• Powered from the SeaTalk network
• Features reliable multi-stage transistor SeaTalk interface
• Iso or High Speed USB 2.0 Interface
• Compatible with all versions of Windows, OSX and LINUX
• Can operate in "Raw Data" mode ($STALK) through configuration
• Converts all of the key navigational data