964 MSD SaniPottie Portable Toilet - 2.5 Gal Holding Tank, Parchment, with Hold Down Brackets

Sealand's basic economy model, the 960 Series of SaniPotties is not as sophisticated as their 970 Series counterparts.
The SaniPottie 960 Series is a traditional dual tank portable toilet with a manual bellows-pump flushing mechanism. Push down on the the top of the bellows mechanism (located at the top, rear of the toilet) several times to flush.
Unlike the 970 Series, these 960 series toilets have a slightly textured matte finish and no pour spout for manual emptying. The emptying port is located at the bottom rear of the holding tank, rather than on top. There is no latching seat lid, pressure relief valve, or tank level indicator in the holding tank.

As is typical for many portable boat porta potty, the SaniPottie 960 series comes with either small or large waste tanks. The 964 models can hold 2.5 gallons of waste, and the 965 models hold 5 gallons. The upper portion of the toilet, including the flush water tank, is identical on all models.

Each size of SaniPottie 960 toilet is offered in two models for emptying:
Standard models (see Related Products, below) are emptied by carrying the holding tank base (with integral handle) to a disposal facility, removing the tank cap, and pouring out the contents.
MSD models shown here feature a molded-in 1-1/2" hose port for dockside pump-out without having to move the toilet. (The MSD fitting includes a 5/8" hose port for a tank vent.)
Typically, the MSD toilets are "hard plumbed" with a user supplied 1-1/2" hose being connected to a pump-out deck fitting, and the vent hose to a small thru-hull fitting. If desired, the hose may be connected to a larger holding tank via an auxiliary manual or electric pump.
Like the Standard models, MSD models can also be emptied via the rear drain opening, should you ever need to carry the holding tank to a disposal facility.

Note that while most of the 960 Series toilets come with mounting brackets over which side latches lock the toilets firmly in place, some do not,.
For those who do not need mounting brakets, the 962 model (2.5 gallon Standard only) toilets do not include them.

• 2.3 gal flush water supply tank with vacuum vent (all models)
• High density polyethylene construction withstands marine environment
• Scratch-concealing matte finish looks new for years
• Offered in two colors - parchment or platinum
• Lift-up seat with lid
• Easy disposal via opening port or 1-1/2" hose connection
• Simple to winterize and maintain
• All parts and seals are user replaceable
• Two-year limited warranty
• 2.5 gal models measure 12-1/2"H x 14-1/2"W x 16-1/2"Deep
• 5.0 gal models measure 15-1/2"H x 14-1/2"W x 16-1/2"Deep

Click here for an overview of portable toilets and their features.