Class T Fuse Block - 225-400A w/ Cover, Sealed

This fuse system recommended by most inverter manufacturers for high speed response to short circuits.

• Clear insulating cover, satisfies ABYC/USCG requirements
• For use on systems up to 160 Volts DC
• Large 3/8"-16 stud terminals accept ring terminals for wire up to 4/0 AWG
• Large heat dissipating tin-plated copper mounting blocks
• Cover Accepts Circuit ID Labels
• Sealed to IP67
• Ignition protected
• Fuses sold separately Designed to be waterproof and ignition protected for use in harsh environmental conditions. Comes with a protective cover featuring breakaway tabs. Height is compatible with other components of the FLEX system. Separate stud connections for cable mounting enable the use of heavier gauge cables and their terminals to connect to and disconnect from the fuse, rather than relying solely on the fuse tab itself.

Fully Sealed Provides protection against water (IP66 / IP67 / IP6K9K), Dust, and chemicals

Separate Stud Connections for Cable Mounting allow heavier gauge cables and their terminals to feed in and out of the fuse, than would otherwise land on the fuse tab itself

Ignition Protected to support installation in poten??al hazardous gaseous environments such as LPG or in gas boats.

Stainless Steel Self Locking Hardware Ensures long term reliability and ease of installation

Tin Plated Copper Busbars deliver superior electrical performance with minimal voltage drop

• Maximum Voltage: 80V DC
• Maximum Amperage: Supports All Fuse Values
• Mounting Screw Max Torque: 50 in-lbs (5.5 N-m)
• M5 Nut Recommended Torque: 65 in-lbs (7.4 N-m)
• M5 Nut Maximum Torque: 75 in-lbs (8.5 N-m)
• M6 Nut Recommended Torque: 80 in-lbs (9.0 N-m)
• M6 Nut Maximum Torque: 100 in-lbs (11.3 N-m)
• M8 Nut Recommended Torque: 100 in-lbs (11.3 N-m)
• M8 Nut Maximum Torque: 120 in-lbs (13.6 N-m)
• M10 Nut Recommended Torque: 120 in-lbs (13.6 N-m)
• M10 Nut Maximum Torque: 140 in-lbs (15.8 N-m)
• Mounting Holes: 4x #10(M5) & 2x 1/4"(M6)
• Cover Material: Clear Polycarbonate
• Base Material Nylon: 6 30% GF
• Operating Ambient Temperature Range: -40 C to 125 C
• Max Storage/Shipping Temperatures: -50 C to 140 C
• Busbar Material: Tin Plated Copper
• Ignition Protected: Yes
• Ingress Protection Ratings: IP66, IP67, IP6K9K