Hand Crimp Gate Eye, 1/8"

• Crimp stud terminal is threaded into eye
• Used as an attachment point for pelican hooks at gate openings
• The eye on the standing part of the lifeline wire prevents the life line from going slack when the gate is opened


Heavy on the technical side...

Hand Crimp terminals, when properly applied, are approximately 65% - 70% the strength of 7 x 7 stainless steel wire.
While this has proven adequate for use in lifelines, these fittings should not be used for standing rigging or other high load applications.
For correct attachment, manufacurer's instructions must be followed.