62 Series Carbon Monoxide Alarm, White, Flush Mount

• NMMA Listed Component
• Space Saving design works in harsh marine environment.
• No False Alarms due to new boat smell, outgassing or non-hazardous levels of hydrocarbon gases encountered while boating.
• Works in extreme temperatures. Only marine CO alarm listed to operational temperatures of -40°F to 158°F. Alarm has consistently held up in the excessive cold and heat due to high quality sensor.
• No False Alarms due to new boat smell, outgassing or non-hazardous levels of hydrocarbon gases encountered while boating. Interconnect and generator shut off alarms available.
• Low Current Draw(37 mA). Innovative micro current circuit saves battery power for the boater.
• Alarm Mute with Auto Reset. With a press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. Alarm will reactivate if it still senses dangerous levels of CO.
• End of Life Signal alerts boater to replace the alarm after 5 years of service.
• Memory Scan. Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory. vRapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain.
• Certified to CSA Std 6.19-01 (R2006)*
• Conforms To ANSI / UL STD 2034*
• * Testing Laboratory: ETL/Intertek
• Alarm Point: 400 PPM 4-15 Minutes
• Low voltage power warning at 7 Volts
• Power Supply and Current Draw: 37 mA @ 13.8 VDC
• Operational Range: 13.8 Volts +/-15%
• Low voltage power warning at 7 Volts
• Operating Temperature: -40°F to +158°F
• Case Size: 3.5"W x 2.5"H x 1.25"D (Surface Mounting Bracket .25"D