Quantum 2 CHIRP Radar with Doppler - White - No Cables

The Quantum 2 next generation CHIRP pulse compression radar by Raymarine provides superior target awareness at both long and extremely short ranges with Doppler collision avoidance technology.

Easily Identify Dangerous Targets
Using advanced Doppler processing, the Raymarine Quantum 2 system instantly highlights moving radar contacts and color codes them to indicate whether they are inbound or outbound. The Quantum 2 with Doppler color-coding system makes it easy to discern potentially dangerous targets when navigating in high-traffic areas, thus reducing the risk of collision.

Safer Navigation
Quantum 2's exclusive Safety Sector feature provides the maximum level of visibility to dangerous targets in the path of your vessel (both mobile and stationary). Doppler does an excellent job of bringing attention to moving targets, and the Safety Sector feature provides equal attention to stationary threats by coloring them as inbound targets. Potential targets include: Buoys. Exposed Hazard (rocks, pilings, etc). Slow moving, low visibility vessels. Quantum 2's Safety Sector spreads 15° from the bow to a distance of approximately 200m.

Superior Collision Avoidance
Doppler-enabled MARPA (mini-automatic radar plotting aid) provides an effortless means of dangerous target tracking by eliminating the need to set up guard zones. Raymarine MARPA target tracking is the same technology trusted by the United States Coast Guard
• Doppler moving target display allows for superior situational awareness at-a-glance
• Fully automatic ARPA (automatic radar plotting aid) target tracking, along with manual MARPA (mini-automatic radar plotting aid) mode
• CHIRP Pulse Compression detects contacts as close as 18-feet for zero-visibility navigation
• 24-mile range for early detection of traffic, navigation aids, landfall and weather
• Immediate awareness: Quantum starts up and is ready to go in seconds
• Superior interference rejection eliminates noise from other radars
• Easy upgrade: Quantum 2 fits the same bolt pattern as other Raymarine scanners
• Lightweight and easy to install: Quantum weighs up to 50% less than comparable magnetron radars
• Safe emissions: Mount Quantum anywhere onboard
• Low power consumption for extended battery life when under sail or not running an engine or generator
• The Quantum 2 also features fully automatic target acquisition and tracking, calculating course, speed, closest point of approach and more
• Configure custom safety or alarm zones and be alerted to new radar contacts entering the zone
• You'll be alerted to dangerous contacts with audible alerts and easy-to-understand on-screen graphics
• Quantum 2 also features Raymarine's new True Trails target history display
• The True Trails feature enables you to see a historical "wake" behind every moving contact
• The Trail makes it even easier to interpret the motion of other vessels, allowing you to make smart maneuvering decisions to pass safely
• Quantum 2 with Doppler can be installed in a traditional wired configuration, or use its built-in Wi-Fi technology to connect it to your Raymarine MFD

How Doppler Radar Works:
Microwave energy waves are bounced off of a distant target, just like conventional radar. Moving targets send back echoes whose frequencies shift upward or downward from what was originally transmitted. For inbound targets, the frequency increases as the leading edge of the returning echoes are received more frequently as the target's range decreases. For outbound targets, the frequency drops as the returning echoes spread out as its range increases. Doppler radars are engineered to detect these small shifts in wave frequency, and use them to classify moving radar targets.

Doppler Target Processing:
Doppler radar is tuned specifically to detect the radar echo frequency shift returned by moving vs. stationary targets. Quantum 2 then uniquely color codes moving targets to indicate whether they are getting closer, or moving away. Inbound targets are colored red. Outbound targets are colored green. Color coded targets make it simple to pick out moving traffic from other stationary targets like land, navigation aids or stopped/anchored vessels.