9 lb Stainless Steel Vulcan Anchor - See Chart for Proper Sizing

Building on the success and performance of the Rocna anchor, the Vulcan design offers the greatest possible compatibility across a wide range of vessel bow configurations - particularly powerboats with an enclosed bow roller assembly, as well as sailboats with bowsprits.

Despite the great success of the Rocna, some boat owners have difficulty accommodating the roll-bar that is fundamental to its design on their bow. The Vulcan anchor is an ideal alternative for these boaters, since the omission of a roll-bar combined with a carefully designed shank profile ensures a snug fit on the bows of a wide range of vessels. Platforms, bowsprits, prods, stays, and other protrusions are easily cleared.
The curved shank also encourages self-launching and smooth retrieval on a majority of bow rollers, ensuring ease of use for all operators.

The Vulcan anchor design features a unique combination of shank and fluke geometry which, in conjunction with a roll-palm™ at the rear of the fluke, self-rights the anchor on the seabed without the use of either a roll-bar or a large mass of inefficient tip ballast.
The Vulcan has a larger fluke surface area than other designs that rely on dedicated tip weight. The larger fluke area directly equates to more holding power and security on a weight-for-weight basis.

Shank strength is achieved by a unique I-beam geometry which provides increased resistance to bending. This innovation also improves setting performance by placing the cutting edge of the tip at the ideal angle for fast and deep burial in the seabed.

When you handle this anchor, you will appreciate the Vulcan's quality workmanship and attention to detail - from high quality welds to chamfering the edges of the shank for aesthetics and comfort when handling.

• Elimination of the roll-bar provides a snug fit on the bow of any boat, including those with platforms and bowsprits
• Suitable for large yachts and powerboats down to small runabouts; models from 9 lb to 121 lb
• Unique shank and fluke geometry and innovative roll-palm™ self-right the anchor on the seabed
• Larger fluke area than competing designs means more holding power
• V-bulb™ fin on bottom of anchor angles the tip for maximum penetration
• Self-launching and self-stowing on the majority of bow rollers
• Truly functional, low-positioned attachment hole for tandem anchoring in extreme conditions, with a separate attachment point for a buoyed retrieval line
• Available in polished stainless steel or galvanized steel
• Lifetime warranty against breakage or deformation

Selecting a Vulcan anchor
To select the proper size Rocna Vulcan anchor for your boat, use the sizing chart brochure linked in the Manufacturers Resources on the right.

Note that to get the best fit your vessel's length and displacement are used to determine the anchor size:
Find your vessel’s overall length in the column on the left, then track across that row toward the right until you find the first column with a displacement (in pounds) the same or larger than the displacement of your vessel.
Track upward to the top of that column for the recommended Vulcan anchor size.
The rows at the bottom of the chart give equivalent anchor weights in pounds and kilograms, recommended chain sizes, and fluke areas.
If in doubt about the proper size, give preference to the larger anchor model. Relatively high displacement or high windage vessels should choose a larger anchor, while a smaller anchor may be appropriate for especially light displacement boats.
Multi-hulls, with their very high windage, should size as though for a monohull, then choose an anchor one size larger.

The Vulcan sizing chart is conservative. Unlike other manufacturers, Vulcan sizing recommendations are intended to provide an anchor adequate for use in most all conditions. Calculations are based on 50 knots of wind, associated surge, and soft, moderate holding bottom conditions into which the anchor has set. Adequate scope is assumed. These recommendations provide holding power in excess of that typicallly recommended by other manufacturers...but you will sleep better at night.

As always, note that this chart is a guideline only, and if you have questions, or would like further information, please call us at 800-426-6930.