Gusher 10 Mk3 Manual Pump, Replacement - Fork Assembly

The original bilge pump choice for sailors in extreme conditions, its high output makes the Gusher 10 Mk3 suitable for the family cruising boat as well as offshore cruiser/racer or workboat.
The self-priming Gusher 10 features extra large valves to reduce the likelihood of blockage by any stray debris in the bilge water.

This pump is approved for use in lifeboats and is used extensively for the manual pump-out of effluent holding systems.
The design gives instant access to all parts for maintenance.
3 mounting options available – bulkhead, feck, or thru-deck mounting

In addition to bilge or effluent use, the Gusher 10 is also suitable for diesel transfer. It can empty a 54 gallon drum in less than 4 minutes.

• With 3 ft of lift: 11 GPM @ 45 strokes/min; 17 GPM @ 70 strokes/min
• With 6 ft of lift: 10 GPM @ 45 strokes/min; 15 GPM @ 70 strokes/min
• Max. priming height - 13-1/2 ft
• Maximum head - 13-1/2 ft
• 1 1/2" hose connection
• The BP3704 does not include a deck plate; it can be used with either the DP8904 (plastic) or DP3804 (alloy) deck plates, both of which include the rubber gaiter seal
• 5-year limited warranty